From raw footage to finished scenes

Got a long clip full of mixed shots? Scene Detect analyzes the clip optically, finds the scene changes, and creates one clip per scene – so your montages, highlight reels, and social clips start with ready-made building blocks that you just drag onto the timeline.

How it works

Scene Detect is registered in the context menu of video clips in the BIN as a Scene Detect submenu with two system presets:

• Easy – fully automatic: after the analysis, BAT Server applies the detected scene changes automatically with the default threshold. The Scene detect tab in EDIUS (which also shows the progress) then closes itself.
• Advanced... – interactive: the Scene detect tab stays open after the analysis. Every detected scene change appears as a bar with thumbnails (frames right before/after the cut) and timecodes. You can adjust the threshold with a slider (presets: low / medium / high) or, in Refine mode, with one checkbox per cut. You confirm the result with the clips to BIN button.

The BIN then receives a folder Scenes: <file name> containing one clip per scene (named "Scene 1 - …", "Scene 2 - …", etc.), each with in/out points on the original file and a poster frame. N detected cuts produce N+1 scene clips. The original clip is left untouched; running Scene Detect again on the same clip refreshes the existing folder and its clips.

Options

• Threshold (default: 50, i.e. 0.5 internally) – Controls which scene changes are applied: a higher value produces fewer, more distinct cuts; a lower value also picks up subtler transitions. In the Advanced tab you can adjust the threshold per file – the last used value is remembered per file and pre-selected on the next run.
• Preview & navigation – In the Advanced tab you can inspect individual changes: hovering over a bar shows preview frames right before and after the cut, and the buttons let you jump straight to the position in EDIUS or play the new scene briefly in the player.
• Caching – Analyzed files are cached. Re-runs on the same clip pick up the existing result cache and finish much faster instead of re-analyzing the video.

Note: Only one scene-detect job can run at a time. If the server is already busy with another clip, it reports "job is running" – in that case, just wait a moment.

How to use it

1. Select the video clip in a BIN (Scene Detect is registered for video clips in the BIN).
2. Right-click the clip → Scene Detect → Easy (automatic) or Advanced... (with preview).
3. The Scene detect tab in EDIUS shows the analysis progress. With Easy it closes itself when finished; with Advanced, adjust the threshold if needed, fine-tune individual cuts with Refine, and confirm with clips to BIN.
4. The BIN now contains the Scenes: <file name> folder with one clip per scene. Drag the scenes you want onto the timeline – scenes you don't need can simply be deleted in the BIN.

Managing the presets

Both are system presets: they appear in the EDIUS context menu, where you can temporarily disable or delete them. System presets are meant to stay unedited — for your own defaults (e.g. a threshold other than 50), create a personal preset with the BAT Server preset assistant, where you can change the threshold= value in the preset URL. A personal preset appears in the clip context menu under its own name.

Cut a person or object out of the frame with AI – as a luma mask for the EDIUS Track Matte

SmartMask isolates the person or the object in the frame automatically using AI (model BiRefNet, Nvidia GPU accelerated) and saves the result as a luma mask (a black-and-white mask video). This mask can be used directly with EDIUS’s “Track Matte” – for example to place titles or graphics behind a person, to swap the person, or to retouch contours. No more manual masking clip by clip.

Adding the menu entry

“SmartMask” is added through the “Add function...” assistant (right-click in the BIN → Add function... → pick SmartMask - foreground extract). The assistant’s questions:

1. What should be isolated? (“Please select the preference what you like to isolate”): Person (model BiRefNet-portrait, optimized for portraits/main subject) or Object and Person (model BiRefNet, general purpose).
2. Computation resolution (percent, 10–100, default 100): for accelerated mask calculation, a reduced resolution is used internally (e.g. 1080p → 540p at a factor of 50 %); the result is then extrapolated back to the source resolution. The smaller the factor, the faster – at the cost of precision. The internal size is limited to a maximum of 1024 px in any case.
3. Add the result to the BIN?: Yes → the mask is registered in the BIN under __BAT Server\Mask (MP4, file stamp -mask); No → file only.
4. Placement (BIN or timeline) and name (suggestion: “SmartMask <selection> <%>”), then [Preview '.bat0' file] / [Add menu entry].

How to use it

1. Right-click the clip (BIN or timeline) → Mask submenu → your entry (e.g. “SmartMask Person 100%”).
2. BAT Server lets BiRefNet compute the foreground mask – a finished mask video (white = foreground, black = background) as an MP4, optionally registered in the BIN under __BAT Server\Mask.
3. In EDIUS: put the original clip in the track matte level and the generated mask below it (or vice versa, depending on the desired logic) – with “Track Matte” the object is cut out cleanly, e.g. to run text behind it.

Good to know

• Person vs. object: the BiRefNet-portrait model (the “Person” option) is specialized for humans and delivers the cleanest results for portrait shots; choose “Object and Person” for products, vehicles or other items.
• Use the computation resolution wisely: 100 % (default) is the most precise but takes longest – and with source material above 1024 px, BiRefNet downscales to a maximum of 1024 px internally anyway. For material with a clearly delimited foreground (plain background, few fine hairs/edges), 50–75 % is is often a good speed/quality compromise.
• The result is a luma mask: the mask video is a normal video that EDIUS can ingest (MP4) – the information lives in the luminance channel. Fine-tuning (blur, re-touching) is possible directly in EDIUS.
• Interlaced sources: the field order is passed to the plugin; for clean masks, progressive material (or deinterlacing beforehand, see Deinterlace) is the best route.
• Nvidia GPU: BiRefNet runs on the Nvidia GPU – without a suitable GPU the entry is not really usable.

Managing the preset

Entries created via the assistant are user presets: the .bat0 file lives under C:\ProgramData\EdiusPowerTools\BAT-server\bat_files\BIN\ or …\bat_files\timeline\ depending on your choice, and can be freely edited, renamed or deleted (deleting removes the context-menu entry). Model, computation resolution and BIN registration are baked into the .bat0 – changes (e.g. a different percentage) take effect from the next run; for a different combination, simply create a second entry.

Speech in any language? No – in English: transcribe, translate, re-voice

Speech2Speech turns spoken audio in any Whisper-supported language into an English voice-over: the assistant-created entry transcribes the audio with Whisper (model large-v2) and translates the text to English on the way – then the AI voice engine Kokoro (Nvidia GPU) speaks the text in a choice of US or UK English voices. A foreign-language interview or voice-over becomes an English-language audio clip with the same timing.

Adding the menu entry

“Speech2Speech” is added through the “Add function...” assistant (right-click in the BIN → Add function... → pick Speech2Speech - Create English Voice). The assistant’s questions:

1. Voice (“Please select the voice. English only.”): Heart (American, female), Michael (American, male), Lily (British, female) or George (British, male).
2. Max. stretch (0–50 %, default 10 %): speech-rate adjustment to fit the sentences into the original time slots; recommended below 15 %, 0 % = off.
3. Add result to the BIN? (“this preset will use the trimmed version of the selected file”) – Yes → additionally registered under __BAT Server\Speech.
4. Placement (BIN or timeline) and name (suggestion: “Translate by <voice>”), then [Preview '.bat0' file] / [Add menu entry].

How to use it

1. Right-click an audio clip (or a clip with audio) → Generate Speech submenu → your Speech2Speech entry (e.g. “Translate by Heart”).
2. BAT Server extracts the audio of the IN/OUT range (16 kHz mono), transcribes + translates it with Whisper-Faster (large-v2) into an English SRT …
3. … and lets Kokoro speak the SRT in the chosen voice. The WAV file is registered as an audio clip in the BIN (additionally under __BAT Server\Speech if you chose so in the assistant) – time stamps included, matching the clip’s frame rate.

Good to know

• The result is always English: the source may be in any Whisper-supported language (the language is auto-detected) – the output voice is US or UK English.
• Timing as in the original: the transcribed sentences inherit the time slots of the original speech; the stretch limit controls how far the speech rate is adapted.
• Preconfigured on board: BAT Server additionally ships the system preset “Translate to English” (Whisper → Kokoro, voice Heart) for audio clips in the BIN – the assistant is for your own voices, names and placements.
• Nvidia GPU: Kokoro runs on the Nvidia GPU; without a suitable GPU the entry is not really usable.

Managing the preset

Entries created via the assistant are user presets: the .bat0 file lives under C:\ProgramData\EdiusPowerTools\BAT-server\bat_files\BIN\ or …\bat_files\timeline\ depending on your choice, and can be freely edited, renamed or deleted (deleting removes the context-menu entry). Voice and stretch value are baked into the .bat0 – changes take effect from the next run.

Subtitles from spoken speech – Whisper with word-exact timing, in three hardware variants

Speech2Subtitle turns an audio file (or the audio of a clip) into an SRT file with exact word timing – using Whisper, the proven AI transcription model. The “Add function...” assistant offers three variants, one per hardware: Intel-optimized (OpenVINO: NPU/GPU/CPU), Nvidia-optimized (Whisper-Faster) or iNPU-optimized (Whisper-NPU for Intel NPUs). All three transcribe in ~90 languages, can optionally translate the result to English, and file the finished SRT directly in the BIN.

Adding the menu entry

In the assistant (right-click in the BIN → Add function...) pick the fitting variant – Speech2Subtitle - Intel optimized, … Nvidia optimized or … iNPU optimized. The shared questions:

1. Language: “Auto-Detect The Language” or one of ~90 languages (Afrikaans … Yoruba).
2. Translate? “Do you want to translate the result to English?” – Yes makes Whisper transcribe directly into English text (e.g. for foreign-language interviews).
3. Scope: the entire video or the clip’s IN/OUT part.
4. Placement (BIN or timeline) and name of the menu entry – the assistants pre-fill it sensibly (e.g. “German, standard, Model Medium, NPU”).

Variant-specific questions on top:

• Intel (OpenVINO): device (Intel NPU / Intel GPU / CPU – AMD included), subtitle format (standard: max. 42 characters per line, max. two lines · standard asia: max. 16 characters per line · one sentence per line – great for TTS · one word per line) and model size (Tiny, Base, Small, Medium – recommended, Large V2, Large V3; bigger = more precise, but slower).
• Nvidia (Whisper-Faster): the same subtitle format, plus high precision (float16) – mandatory from the RTX 5000 series up, simply “No” without an Nvidia GPU – and model size (Tiny … Large V3, Turbo; Medium recommended).
• iNPU (Whisper-NPU): choose the hardware (NPU / GPU / CPU – must be Intel hardware) and the subtitle format. The model is fixed at medium here, and a VAD phase detection (silence detection) is permanently active. Note from the assistant: keep the Intel NPU driver current (version 32.0.100.3053 or newer).

How to use it

1. Right-click an audio clip in the BIN → Generate Subtitle submenu → your entry (e.g. “German, standard, Model Medium, NPU”).
2. BAT Server first extracts the audio (16 kHz mono, optionally the IN/OUT part) and lets Whisper transcribe it – progress in the job display.
3. The finished SRT is registered in the BIN under __BAT Server\Subtitle automatically (file stamp _stt, with a format suffix for the Intel variant). From there it can be taken into an MKV via SubtitleMerge, or used as a speech source for Text2Speech/Convert2Speech.

Good to know

• Variant = hardware: Nvidia GPU → Nvidia variant (fastest on RTX); Intel system with NPU → iNPU variant (and a current NPU driver); everything else (Intel/AMD without NPU) → Intel OpenVINO variant (GPU or CPU).
• Weigh the model size: Medium is the sensible default; Large/Turbo are more precise (esp. filler words, technical terms) but take considerably longer – with the Nvidia variant, float16 is mandatory from RTX 5000 up.
• Line formats: “standard”/“standard asia” are meant for display as subtitles; “one sentence per line” optimizes the SRT for downstream Text2Speech presets, “one word per line” for maximum granularity (e.g. marker/tag workflows).
• New file, original kept: only the SRT file is created; the audio original remains untouched.

Managing the preset

Entries created via the assistant are user presets: the .bat0 file lives under C:\ProgramData\EdiusPowerTools\BAT-server\bat_files\BIN\ or …\bat_files\timeline\ depending on your choice, and can be freely edited, renamed or deleted (deleting removes the context-menu entry). Language, translation, format, model and device are baked into the .bat0 – changes take effect from the next run.

Let existing VisTitle subtitles be spoken – English AI voice, Nvidia GPU

Subtitle2Speech gives your existing subtitles a voice: the preset reads a VisTitle subtitle file (.vtsubtle) and produces a WAV file from it using the AI voice engine Kokoro (Nvidia GPU) – in a choice of US or UK English voices, with the time slots of the subtitles. Ideal for creating an English voice-over pass from filmed material with subtitles, without typing the text in again.

Adding the menu entry

“Subtitle2Speech” is added through the “Add function...” assistant (right-click in the BIN → Add function... → pick Subtitle2Speech - Create English Voice). The assistant’s questions:

1. Voice (“Please select the voice. English only.”): Heart (American, female), Michael (American, male), Lily (British, female) or George (British, male).
2. Max. stretch (0–50 %, default 10 %): speech-rate adjustment to fit the sentences into the subtitles’ time slots; recommended below 15 %, 0 % = off.
3. Add result to the BIN? – assistant note: this preset works on the trimmed version (IN/OUT) of the selected file. Yes → additionally registered under __BAT Server\Speech.
4. Placement (BIN or timeline) and name (suggestion: “Vtsubtle read by <voice>”), then [Preview '.bat0' file] / [Add menu entry].

How to use it

1. Right-click the clip for which a VisTitle subtitle file (.vtsubtle) exists → Generate Speech submenu → your entry (e.g. “Vtsubtle read by Heart”).
2. Kokoro speaks the subtitle texts with the time slots of the .vtsubtle file; the finished WAV file is registered in the BIN (additionally under __BAT Server\Speech if chosen) – including the clip’s frame rate and time stamps.

Good to know

• Source = VisTitle file: the preset reads .vtsubtle files – the subtitles created in EDIUS/VisTitle, for example. Plain SRT files are handled by Convert2Speech instead (which can also transcribe audio).
• English only: the four Kokoro voices speak US or UK English – even if the subtitle texts are written in another language, the engine reads them “in English”.
• Stretch in moderation: longer sentences in short time slots are stretched up to the set limit – below 15 % the result stays natural sounding.
• Nvidia GPU: Kokoro runs on the Nvidia GPU; without a suitable GPU the entry is not really usable.

Managing the preset

Entries created via the assistant are user presets: the .bat0 file lives under C:\ProgramData\EdiusPowerTools\BAT-server\bat_files\BIN\ or …\bat_files\timeline\ depending on your choice, and can be freely edited, renamed or deleted (deleting removes the context-menu entry). Voice and stretch value are baked into the .bat0 – changes take effect from the next run.

Embed an SRT file from disk into your video – as a switchable subtitle track in an MKV

SubtitleMerge combines a video clip with an SRT subtitle file from your disk into a single MKV file – using MKVMerge. The subtitles are embedded as a switchable track (not burned in), and video and audio are copied without re-encoding: fast, lossless, and the finished file plays in any MKV-capable player with selectable subtitles.

Adding the menu entry

“SubtitleMerge” is added through the “Add function...” assistant (right-click in the BIN → Add function... → pick SubtitleMerge - Create MKV by SRT). The assistant’s questions:

1. Placement in the context menu of the BIN or of the timeline.
2. Name of the menu entry (suggestion: “Add external SRT”), then [Preview '.bat0' file] / [Add menu entry].

That is all the setup takes – you choose the concrete SRT file only at run time.

How to use it

1. Right-click the video clip → your entry (e.g. “Add external SRT”).
2. A file dialog opens: pick the desired SRT file from disk.
3. MKVMerge combines video + SRT into an MKV file (stored next to the source file) – the subtitles are included as a track and can be toggled in the player with a click.

Good to know

• Embedded, not burned in: the SRT is embedded as a switchable subtitle track. For burned-in (always visible) subtitles this is not the right tool.
• No re-encode: the video and audio streams are copied 1:1 – the job is fast and no quality is lost. H.264-in-MKV is read without issues by most players/platforms.
• The timing must match: the SRT is embedded “as found” – it has to match the (possibly IN/OUT-trimmed) timeline of the clip. With IN/OUT points on the clip, the SRT must be shifted/trimmed accordingly.
• No automatic BIN registration: the finished MKV is stored as a file next to the source and not registered in the BIN automatically – import it into EDIUS via the normal import to add it.

Managing the preset

Entries created via the assistant are user presets: the .bat0 file lives under C:\ProgramData\EdiusPowerTools\BAT-server\bat_files\BIN\ or …\bat_files\timeline\ depending on your choice, and can be freely edited, renamed or deleted (deleting removes the context-menu entry). As with all BATS presets, the .bat0 is a template from which BAT Server generates the concrete job file on every run – changes take effect from the next run.

Text turned into speech in seconds – Kokoro on OpenVINO, straight into an EDIUS tab

Text2Speech is the fast route from idea to spoken track: via a menu entry in EDIUS you open a Text2Speech tab in the player, type or paste text, pick language and voice, audition the output – and the finished WAV file lands directly in the BIN. It is driven by Kokoro on the OpenVINO framework (Intel NPU/GPU or CPU) – with a smart cache (repeated text is loaded from the cache instead of being computed again), a preview mode, simple input dialogs and an activity log.

Adding the menu entry

“Text2Speech” is added through the “Add function...” assistant (right-click in the BIN → Add function... → pick Text2Speech - fast audio speech generation). The assistant’s questions:

1. Device (“Please select the device to create the subtitle.”): Intel NPU (fastest, on supported hardware) · Intel GPU · CPU (Intel/AMD).
2. Placement: context menu of the BIN or of the timeline.
3. Name of the menu entry (suggestion: “Add speech..”), then [Preview '.bat0' file] / [Add menu entry].

Note: BAT Server already ships the system preset “Add Speech....bat0” (BIN, device: AUTO) – run the assistant if you want your own names, a different placement or a fixed device.

How to use it

1. Right-click an entry in the BIN (or on the timeline) → your Text2Speech entry (e.g. “Add speech..”).
2. BAT Server prepares the TTS server (toast “Text2Speech server is being prepared for speed…”) and opens the Text2Speech tab in the EDIUS player – analogous to the Cut-by-Text tab.
3. In the tab: enter text, pick language and voice, preview and save the WAV file – it is read directly into EDIUS (BIN). Repeated texts come from the smart cache and are ready almost instantly.

Good to know

• 9 languages with their own voices – you see the per-language offerings directly in the tab.
• EDIUS must be running: the tab opens in the EDIUS player, and the result is taken into the BIN via EDIUS.
• Smart cache: identically phrased texts are not recomputed but loaded from the cache – for serial speech tracks (e.g. the same on-screen sentences) that saves noticeable time.
• The device choice is baked in: NPU/GPU/CPU is in the .bat0; the shipped system preset uses AUTO (self-detecting) instead.

Managing the preset

Entries created via the assistant are user presets: the .bat0 file lives under C:\ProgramData\EdiusPowerTools\BAT-server\bat_files\BIN\ or …\bat_files\timeline\ depending on your choice, and can be freely edited, renamed or deleted (deleting removes the context-menu entry). As with all BATS presets, the .bat0 is a template from which BAT Server generates the concrete job file on every run – changes take effect from the next run. The shipped system preset “Add Speech....bat0” is outside this freedom (system presets are meant to be protected from accidental edits, but can be deactivated).